The 8ZED Special Edition 1000 Watt Modified Sine Wave Power Inverter has an inbuilt safety system, designed to monitor the following conditions: 

1. Low Battery Voltage - This condition is not harmful to the inverter but it could damage the power source. An audible alarm is sounded when the input voltage drops to a certain voltage. The inverter shuts down when the input voltage drops too low. When the condition is corrected the unit can be restarted.
2. Short Circuit - Reverse polarity or short circuit condition of the load will usually result in the opening of the short circuit protection.
3. High Temperature - When the temperature of the internal heat sink reaches 65 degrees C, the solid state temperature sensor will automatically shut down the unit. Once it is allowed to cool it can be restarted.

Before using Modified Sine Wave Inverters, always check with the manufacturer of the appliance you want to run. Modified Sine Wave Inverters can operate with most household appliances, but some appliances require to run on a pure sine current, or a current that very closely matches mains power cycles. Avoid damaging the appliance and the Inverter by checking appliance manufacturers specifications. Modified sine wave inverters are cheaper to manufacture than Pure Sine Wave inverters, as they have more basic and fewer electronic components. 8Zed warranty will not cover damage by misuse or plugging in unsuitable appliances. 

• Some Power Tools; Including Drills, Sanders, Orbital Polisher's, Angle Grinders
• Some Lights
• Fans
• Small Pumps
• Small Vacuum Cleaners
• Small Fridges (allow 4-6 times the power required. For more information, please refer to the FAQ's)
• Not suitable for lithium ion fast chargers

Please Note: Some electrical appliances (such as power drills, refrigerators, power tools, pumps, compressors, cooking appliances etc) often need more power than what they specify.

• Input Voltage: 24V DC
• Output Voltage: 230V ±3% AC
• Output Frequency: 50 ± 3Hz
• Continuous Power Output: 1000W
• Peak Output Power: 2000W
• Output Waveform: Modified Sine Wave
• Idle Draw: <1.9A
• AC Regulation: 3%
• Efficiency: 85%

• Ambient Temperature: -10°C → 40°C
• Low Input Voltage Warning: 10.5±0.5V
• Low Input Voltage Shut Down: 9.5V±0.5V
• High Input Voltage Shut Down: 15.5V
• Overheat Protection: 67°C±3°
• Reverse Polarity protected 

Dimensions

• Dimensions: 274 x 157 x 79 (mm) (Including Terminals)
• Weight: 2.15kgs

Accessories

• 1x Positive & 1x Negative Terminal to Terminal Connection Cable
• 1x Grounding Cable
• 1x Instruction/Specification Booklet